雙組份打膠機概述

　　Overview of two-component gluing machine

　　雙組份打膠機是現代工業生產中常用的設備，尤其在中空玻璃和幕墻玻璃的生產中發揮著重要作用。它通過精準的配比混合 A、B 組份，實現高效的生產線作業，提升產品質量。對于追求高品質和高效率的玻璃深加工場景而言，雙組份打膠機是合適的選擇。

　　The two-component gluing machine is a commonly used equipment in modern industrial production, especially playing an important role in the production of insulating glass and curtain wall glass. It achieves efficient production line operations and improves product quality by accurately mixing components A and B. For glass deep processing scenarios that pursue high quality and efficiency, a two-component gluing machine is a suitable choice.

　　設計用途及特點

　　Design purpose and characteristics

　　雙組份打膠機專為需要高配比精度的膠種而設計，能滿足玻璃深加工領域對高效率、高合格率流水線作業的需求。它能夠同時完成 A、B 組份的混合與涂膠工作，是生產高檔優質中空玻璃及玻璃幕墻產品的重要設備。

　　The two-component glue machine is designed specifically for glue types that require high proportioning accuracy, and can meet the high efficiency and high qualification rate of assembly line operations in the field of glass deep processing. It can simultaneously complete the mixing and gluing of components A and B, and is an important equipment for producing high-end and high-quality insulated glass and glass curtain wall products.

　　雙組份打膠機的結構及工作原理

　　Structure and working principle of two-component gluing machine

　　核心結構組件

　　Core structural components

　　雙組份打膠機的核心結構包括 A、B 膠泵、氣動系統、升降機構以及穩固的機架。這些組件協同工作，確保機器能夠高效、精確地完成 A、B 組份的混合與涂膠任務。

　　The core structure of the two-component gluing machine includes A and B glue pumps, pneumatic system, lifting mechanism, and stable frame. These components work together to ensure that the machine can efficiently and accurately complete the mixing and gluing tasks of components A and B.

　　膠泵設計與功能

　　Design and Function of Rubber Pump

　　雙組份打膠機中，A、B 組份各自配備了一個膠泵。這些膠泵在氣馬達的驅動下，進行往復運動，實現膠的吸入與壓出。每個泵都與壓膠盤相連，形成獨立系統，確保操作靈活和性能穩定。

　　In the two-component glue machine, each component A and B is equipped with a glue pump. These glue pumps are driven by pneumatic motors to perform reciprocating motion, achieving the suction and extrusion of glue. Each pump is connected to a pressure plate to form an independent system, ensuring flexible operation and stable performance.

　　配比和出膠量控制

　　Proportion and glue output control

　　A、B 組份的混合比例是通過比例杠桿來精準調節的。出膠量則通過氣源處理器進行調控，通過調節可以實現靈活的 A、B 組份配比和精確的出膠量。

　　A. The mixing ratio of component B is precisely adjusted through a proportional lever. The glue output is regulated by the air source processor, which can achieve flexible A and B component ratios and precise glue output through adjustment.

　　雙組份打膠機的操作流程

　　Operation process of two-component gluing machine

　　接通氣源與系統調試

　　Connect the gas source and system debugging

　　啟動雙組份打膠機之前，需接通氣源并調節減壓閥至適當的壓力范圍，通常在 0.4~0.6Mpa。進行系統檢查確保無漏氣后再進行試運行。

　　Before starting the two-component gluing machine, it is necessary to connect the air source and adjust the pressure reducing valve to an appropriate pressure range, usually between 0.4~0.6Mpa. Perform a system check to ensure there is no air leakage before conducting a trial run.

　　膠桶定位與正式打膠操作

　　Rubber bucket positioning and formal gluing operation

　　在雙組份打膠機啟動之前，需要確保膠桶與膠泵軸線精確對中。操作步驟包括手動轉閥操作、膠桶放置、排氣并進行試打膠。完成準備后，調整比例泵開始正式打膠。

　　Before starting the two-component glue machine, it is necessary to ensure that the glue bucket and the glue pump axis are accurately aligned. The operation steps include manual valve rotation, placement of the glue bucket, exhaust, and trial gluing. After completion of preparation, adjust the proportional pump and start to apply glue formally.

　　雙組份打膠機的使用注意事項

　　Precautions for using two-component glue machine

　　關鍵操作要點

　　Key operational points

　　操作雙組份打膠機時，需謹慎監控膠桶中的膠量，一旦發現膠量不足，應立即停機并關閉相應開關。在操作過程中，應按照正確的操作順序，確保設備正常運行和打膠質量。

　　When operating the two-component glue machine, it is necessary to carefully monitor the amount of glue in the glue bucket. Once insufficient glue is found, the machine should be stopped immediately and the corresponding switch should be turned off. During the operation process, the correct sequence of operations should be followed to ensure the normal operation of the equipment and the quality of adhesive application.

　　膠槍使用維護

　　Rubber gun usage and maintenance

　　在使用膠槍時，應定期檢查和維護，遵循安全操作規程以防止故障和漏氣。這包括定期清理混膠器，避免堵塞，以及在長期不用時進行適當的清洗和維護，以保障膠槍的有效運作和提升使用效果。

　　When using a glue gun, regular inspection and maintenance should be carried out, and safety operating procedures should be followed to prevent malfunctions and air leaks. This includes regular cleaning of the glue mixer to avoid blockages, as well as appropriate cleaning and maintenance when not in use for a long time, to ensure the effective operation of the glue gun and improve its effectiveness.

　　本文由雙組份打膠機友情奉獻.更多有關的知識請點擊:http://m.ttkjhz.net我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

　　This article is a friendly contribution from glass coating machine equipment For more information, please click: http://m.ttkjhz.net We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message